64kHz Corrosion Resistant Ultrasonic Sensor for Ultrasonic Level Gauge

64KHz Anti-corrosive Ultrasonic Transducer for Ultrasonic Level Transducer  Technical parameters: ItemsTechnical ParametersImageName64KHz anti-corrosive transducerModelPHA-64-05PA   Frequency64KHz±5%Detection Distance0.3~5mMinimumParallel lmpedance2200Ω±20%Capacitance1000pF&plusm

Featured Products

64KHz Anti-corrosive Ultrasonic Transducer for Ultrasonic Level Transducer  



Technical parameters:
 
ItemsTechnical ParametersImage
Name64KHz anti-corrosive transducer
64kHz Anti-Corrosive Ultrasonic Transducer for Ultrasonic Level Transducer
ModelPHA-64-05PA   
Frequency64KHz±5%
Detection Distance0.3~5m
Minimum
Parallel lmpedance
2200Ω±20%
Capacitance1000pF±20% @1KHz

Sensitivity
Driving Voltage:880Vpp,Distance:0.6m,
Echo Amplitude:100 mV
Operating
Voltage
Peak Voltage<1500VPP
Operating
Temperature
-40~+80ºC
Pressure≤3Kilos or 0.3MPa

Angle
(Beamwidth) Half-power Beam Width@-3dB:7°±2,Sharp Angle:16°±4
Housing MaterialPVDF

Usage
Ultrasonic level gauge,Monitoring,Crashproof
Installation
Dimension
Bottom with thread :M48×2 or G1-1/2
Protection LevelIP68
Weight310g±5%
Wiring Instructionsintegrated type:connector(3PIN,2.54mm terminal):Red+,White-,Black: shielded wire;connector(3PIN,2.0mm terminal):white,black:temperature sensor(MF58);
Admittance CurveProduct Structure Diagram

64kHz Anti-Corrosive Ultrasonic Transducer for Ultrasonic Level Transducer
64kHz Anti-Corrosive Ultrasonic Transducer for Ultrasonic Level Transducer

 
    
        
 
Block diagram of ultrasonic Distance transducer :


64kHz Anti-Corrosive Ultrasonic Transducer for Ultrasonic Level Transducer

Schematic Diagram of Temperature Sensor (model: MF58_502F3470):

64kHz Anti-Corrosive Ultrasonic Transducer for Ultrasonic Level Transducer

Integrated type Cable instruction:   
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +      
White: transducer -         
Black: shielding


64kHz Anti-Corrosive Ultrasonic Transducer for Ultrasonic Level Transducer

2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)

64kHz Anti-Corrosive Ultrasonic Transducer for Ultrasonic Level Transducer
Red and black are temperature sensor wiring



 Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB

Three-core wiring instructions:                
                        
    Red: Transducer +
     Blue: temperature sensor +
     Black: Public-

64kHz Anti-Corrosive Ultrasonic Transducer for Ultrasonic Level Transducer

 Four-core wiring instructions:

Red: Transducer +                      
Yellow: Transducer-
Blue, black: temperature sensor

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours