100kHz Ultrasonic Level Sensor for Distance Measurement

100Khz Ultrasonic Level Transducer Sensor for Distance Measurement Technical parameters:  ItemsTechnical ParametersImageName100KHz ultrasonic transducerModelPHA-100-03H   Frequency100KHz±5%Detection Distance0.15~3mMinimumParallel lmpedance350Ω±20%Capacitance950pF±20% @1KHz

Featured Products

100Khz Ultrasonic Level Transducer Sensor for Distance Measurement 


Technical parameters:
 
 
ItemsTechnical ParametersImage
Name100KHz ultrasonic transducer100kHz Ultrasonic Level Transducer Sensor for Distance Measurement
100kHz Ultrasonic Level Transducer Sensor for Distance Measurement
ModelPHA-100-03H   
Frequency100KHz±5%
Detection Distance0.15~3m
Minimum
Parallel lmpedance
350Ω±20%
Capacitance950pF±20% @1KHz

Sensitivity
no-load Driving Voltage:300Vpp,Distance:0.3m,Echo Amplitude:80mV
Operating
Voltage
Peak Voltage<800Vpp
Operating
Temperature
-40~+80ºC
Pressure≤3Kilos or 0.3MPa

Angle
(Beamwidth) Half-power Beam Width
@-3dB:9°±2,
Sharp Angle:21°±4
Housing MaterialPOM

Installation
Dimension
See the structure diagram
Protection LevelIP68
Weight17g±5%(Length:20cm)
Wiring instructionIntegrated  Interface:Red: transducer+,White: transducer-,
Black: shielded wire,( temperature sensor is optional)
Admittance CurveProduct Structure Diagram

100kHz Ultrasonic Level Transducer Sensor for Distance Measurement
 100kHz Ultrasonic Level Transducer Sensor for Distance Measurement
                 
 
Block diagram of ultrasonic Distance transducer :


100kHz Ultrasonic Level Transducer Sensor for Distance Measurement

Schematic Diagram of Temperature Sensor (model: MF58_502F3470):

100kHz Ultrasonic Level Transducer Sensor for Distance Measurement

Integrated type Cable instruction:   
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +      
White: transducer -         
Black: shielding


100kHz Ultrasonic Level Transducer Sensor for Distance Measurement

2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)

100kHz Ultrasonic Level Transducer Sensor for Distance Measurement
Red and black are temperature sensor wiring



 Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB

Three-core wiring instructions:                
                        
    Red: Transducer +
     Blue: temperature sensor +
     Black: Public-

100kHz Ultrasonic Level Transducer Sensor for Distance Measurement

 Four-core wiring instructions:

Red: Transducer +                      
Yellow: Transducer-
Blue, black: temperature sensor

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours